What you need for producing a charming tealight candle holder is just:
The dimensions of the produced tealight candle holder will be as following:
Height: 16 cm
Depth: 7 cm
Width: 9.8 cm
Candles with 3,8 - 4 cm diameter can be put the candle hole in the center of the product.
If you don't want to have tiny bubble holes on your tealight candle holders, please kick gently from its side to the mold, while you pour the mortar into it, to avoid bubbles.
To prepare mold for the casting,
first please cover the outer support shells around the silicone mold
and stabilize the support shells with file clamps or thick elastic rubber bands.
Pour the mortar into the mold, from a 25-30 cm height, with thin flow.
Wait until the poured mortar sets (dries) in 15-30 minutes,
When the mortar is set and the concrete product is ready to demold;
first disassemble the outer shells and then gently demold the product from the concrete tealight mold.
If needed, wipe the mold and the support shells with a wet napkin.
Once your tealight candle holder is demolded, you can leave it as it is, to use in minimalist interiors.
Or you can decorate it in geometric designs as following with acrylic dye and bands:
Your elegant tealight candle holders are now ready!
You can combine the home tealight candle holder model M23 with our other concrete planter models.
Or you can use our tray models together with the home tealight model.
If you want your tealight holder to be in marble view, please read our related blog post.
To ensure long life performance of your molds, please read the related instructions.
And the tips on this link will be useful for you.
Please do not hesitate to ask your questions.
We are ready to support you and your creative vision.