Silicone mold for home tealight - M23

Product Code: M23
Stock Status: In stock
Dispatch Time: 1-3 business day
Weight: 0.966 kg
Cargo (0,1 - 10 KG) = 25 USD Check
Price: 57.00 $

Make Concrete Tealights with Silicone Molds of Depar Home

What you need for producing a charming tealight candle holder is just:

  • Tealight model M23
  • Some water, with less chlorine and low lime content, that is rested for 24 -36 hours
  • 700 grams of quick-set mortar without acid

The dimensions of the produced tealight candle holder will be as following:

Height: 16 cm
Depth: 7 cm
Width: 9.8 cm
Candles with 3,8 - 4 cm diameter can be put the candle hole in the center of the product.
If you don't want to have tiny bubble holes on your tealight candle holders, please kick gently from its side to the mold, while you pour the mortar into it, to avoid bubbles.
To prepare mold for the casting,
first please cover the outer support shells around the silicone mold
and stabilize the support shells with file clamps or thick elastic rubber bands. 
Pour the mortar into the mold, from a 25-30 cm height, with thin flow.
Wait until the poured mortar sets (dries) in 15-30 minutes,
When the mortar is set and the concrete product is ready to demold;
first disassemble the outer shells and then gently demold the product from the concrete tealight mold.
 If needed, wipe the mold and the support shells with a wet napkin. 
Once your tealight candle holder is demolded, you can leave it as it is, to use in minimalist interiors.
Or you can decorate it in geometric designs as following with acrylic dye and bands:

  1. Decide the geometric decor that you want to do;
  2. Stick the bands (in desired widths) randomly over the concrete tealight candle holder;
  3. Dye the empty spaces with paints in harmony with each other;
  4. Wait until the dyes are dried, and then remove the bands.

Your elegant tealight candle holders are now ready!
You can combine the home tealight candle holder model M23 with our other concrete planter models.
Or you can use our tray models together with the home tealight model. 
If you want your tealight holder to be in marble view, please read our related blog post.
To ensure long life performance of your molds, please read the related instructions.
And the tips on this link will be useful for you. 

Please do not hesitate to ask your questions.
We are ready to support you and your creative vision.

Add Your Comment

In order to comment, you need to member login.